Local service in Bowes Park

---

What Does Rewiring a House Involve?

Rewiring a house is a comprehensive electrical upgrade that involves replacing old or unsafe wiring, circuits, outlets, switches, and other components to ensure safety, enhance efficiency, and comply with current electrical standards. Here’s a detailed breakdown of what rewiring a house involves:

Initial Planning and Assessment

1. Professional Assessment
• Qualified Electrician: Hire a qualified electrician registered with a competent person scheme such as NICEIC, NAPIT, ELECSA, or STROMA to assess the existing electrical system.
• Survey and Planning: The electrician will conduct a thorough survey of the current wiring, circuits, and overall condition of the electrical system. This includes checking the consumer unit (fuse box), inspecting wiring in accessible areas, and identifying any immediate safety hazards.
2. Scope of Work and Quotation
• Detailed Quote: The electrician will provide a detailed quotation outlining the scope of work, materials needed, labor costs, and any additional costs for inspections or certifications.
• Planning: Agree on a plan and schedule for the rewiring work, considering any specific requirements or preferences you may have.

Preparation

1. Clearing Access
• Furniture Removal: Move furniture and clear areas where the rewiring will take place to provide easy access for the electricians.
• Protecting Surfaces: Cover floors and furnishings with protective sheets to prevent damage during the work.
2. Safety Measures
• Power Shutdown: The electrician will safely shut down the power supply to the house to prevent any risk of electric shock during the rewiring process.
• Initial Checks: Perform initial safety checks to ensure the work environment is safe for the electricians.

Removal of Old Wiring

1. Disconnecting Existing Wiring
• Safe Disconnection: Carefully disconnect and isolate the existing wiring, outlets, switches, and other electrical components.
• Removing Wiring: Remove old wiring, ensuring minimal damage to walls and ceilings where possible.
2. Creating Access
• Chasing Walls: Cut channels (chasing) into walls to run new wires if the wiring is concealed within the walls.
• Lifting Floorboards: Lift floorboards in areas where wiring runs under the floors to access and remove old wiring.

Installation of New Wiring

1. Laying New Cables
• Routing Wires: Route new wiring through walls, ceilings, and floors as planned. Use appropriate protective conduits where necessary to safeguard the wiring.
• Securing Cables: Securely fasten the new cables using clips and ties to prevent movement and ensure tidiness.
2. Installing Outlets and Switches
• Positioning: Install new sockets, switches, and other electrical fixtures at the designated positions.
• Connections: Make secure and compliant connections to the new wiring, ensuring proper grounding and polarity.
3. Upgrading the Consumer Unit
• Modern Unit: Replace the old consumer unit (fuse box) with a modern one that includes Residual Current Devices (RCDs) and circuit breakers for enhanced safety.
• Wiring to the Unit: Connect the new wiring to the consumer unit, ensuring all circuits are correctly labeled and organized.

Testing and Certification

1. Electrical Testing
• Comprehensive Tests: Perform a series of tests to ensure all circuits and connections are safe and functioning correctly. This includes continuity tests, insulation resistance tests, polarity checks, and earth fault loop impedance tests.
• Issue of Certification: After successful testing, issue an Electrical Installation Certificate (EIC) or an Electrical Installation Condition Report (EICR) to confirm compliance with the latest IET Wiring Regulations (BS 7671).

Making Good

1. Repairing Walls and Ceilings
• Plastering: Fill in and plaster over any chased wall channels and holes made to access wiring routes.
• Sanding and Painting: Sand any rough patches and repaint to restore the affected areas to their original condition.
2. Final Inspections
• Thorough Check: Conduct a final inspection to ensure all work is completed to a high standard, and the electrical system is fully operational and safe.

Final Steps and Follow-Up

1. User Instruction
• Demonstration: Provide a demonstration of the new electrical installation, including how to operate and reset the consumer unit and any newly installed features, such as smart home systems or new lighting controls.
• Documentation: Hand over all relevant documentation, including the electrical certificate, warranty information, and a detailed report of the work done.
2. Maintenance and Future Proofing
• Regular Inspections: Schedule regular inspections and testing to ensure the electrical system remains in good condition.
• Future Upgrades: Plan for future electrical needs and consider incremental upgrades, such as adding new circuits or integrating renewable energy sources, to keep the system up-to-date and efficient.

Conclusion

Rewiring a house involves a comprehensive process of assessing the existing electrical system, disconnecting and removing old wiring, installing new wiring and electrical components, upgrading the consumer unit, conducting thorough testing and certification, and finally, repairing any cosmetic damage to walls and ceilings. Engaging a qualified electrician to carry out the work ensures compliance with safety standards and regulations, resulting in a safe, efficient, and modern electrical installation. Proper planning, detailed quotes, and clear communication with your electrician will help ensure a smooth and successful rewiring project.